No items found.

Square Mold Housing (4 Corners), Reusable Mold Box, Silicone Mold Making Tools

$ 6.00 
Digital File Description:

Print your own mold housing at home and save money! You can use it to make a silicon mould and cast your own art to sell. 3D print a durable, reusable plastic mold boxes that are easy to use, making it the perfect tool for resin/epoxy enthusiasts and DIYers. Do you need a custom height or diameter, I do custom mold housing! Send me a message! You will need to make 4 prints of each corner to make one complete box. You will also need to print 1 lifted base. The walls can be held together with binder clips. For larger molds I strongly suggest using hot glue.

STL Files
  • Inner Measurements: [ 5.12in ][ 130mm x 130mm ]
  • Height: [ 2.4in ][ 60mm]
  • Vertical Walls are min of 0.2in [5mm] thick
  • Vertical Wall Base is 1in [25mm] wide by 0.2in [5mm] thick
  • Square Base is 180mm x 180mm by 8mm thick

3 Straw Size Variations:
  • 8mm Standard
  • 10mm Large
  • 12mm Jumbo
  • Layer Height: 0.2mm
  • Top/Bottom Layers: 4
  • Perimeters: 3 or 4
  • Seam: Nearest
  • Infill: 15%-20% Grid Pattern
  • No Supports
*Temperature settings are dependent on filament and printer
Mold MAking Tips:
I use Oramask 813 Stencil Film to as a sticky base. This prevents the object you are molding from floating up.  It sticks really well and does not leave residue when you remove it. Remove any dirt or oil from the object before you place it, to ensure it sticks. You can buy it on amazon here:  If this technique fails, get out the hot glue! For the bottom part, you can use many materials, such as clear shipping tape, laminate sheets, double sided tape, etc. I strongly suggest using HOT GLUE around the base for bigger molds.

Related Products

No Membership Required
Only buy what you want.
Sell Unlimited 3D Prints
Licenses available, just ask
New 3D Models Every Month
Join our product mailing list